AD8495CRMZ Datasheet PDF - ADI

●The AD8495CRMZ is a 0 to 50°C Precision Thermocouple Amplifier with cold junction compensators on an integrated circuit. It produce a high level (5mV/°C) output directly from a thermocouple signal by combining an ice point reference with a pre-calibrated amplifier. It can be used as standalone thermometers or as switched output setpoint controllers using either a fixed or remote setpoint control. This can be powered from a single-ended supply (<3V) and can measure temperatures below 0°C by offsetting the reference input. To minimize self heating, an unloaded AD8495 typically operates with a total supply current of 180µA, but it is also capable of delivering in excess of ±5mA to a load. This amplifier is laser trimmed to match the characteristics of K type (chromel-alumel) thermocouples. The AD8495 works with 3V supplies allowing them to interface directly to lower supply ADCs.

● Easy to use

● Pretrimmed for K type thermocouples

● Internal cold junction compensation

● High impedance differential input

● Standalone 5mV/°C thermometer

● Reference pin allows offset adjustment

● Thermocouple break detection

● <1mW Power at VS = 5V

●ESD sensitive device, take proper precaution while handling the device.