ADG706BRUZ Datasheet PDF - ADI

●The ADG706BRUZ is a low voltage 16 channel CMOS analogue multiplexer in 28 pin TSSOP package. This device switches one of 16 inputs (S1-S16) to common output (D) as determined by 4bit binary address lines A0, A1, A2 and A3. An EN input is used to enable or disable device. When disabled, all channels are switched OFF. Low power consumption and operating supply range of 1.8V to 5.5V make the ADG706 ideal for battery powered applications. All channels exhibit break before make switching action preventing momentary shorting while switching.

● Single 16 to 1 multiplexer

● 1.8V to 5.5V single supply and ±2.5V dual supply

● On-resistance of 2.5ohm

● Leakage current of 100pA

● Switching time of 40ns

● Low power consumption

● TTL/CMOS compatible inputs

● Low power consumption of less than 0.01µW

● -3dB bandwidth of 25MHz

● Operating temperature range from -40°C to 85°C

●ESD (electrostatic discharge) sensitive device. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality.