ISO3086DW Datasheet PDF - TI

●The ISO3086DW is an isolated full-duplex RS-485 differential Line Transceiver ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500Vrms of isolation for 60s per UL 1577 between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. This noise transient can cause damage to the transceiver and/or nearby sensitive circuitry if they are of sufficient magnitude and duration. This isolated device can significantly increase protection and reduce the risk of damage to expensive control circuits.

● Thermal shutdown protection

● 16pF Typical low bus capacitance

● 50kV/µs Typical transient immunity

● Fail-safe receiver for bus open, short or idle

● Meets or exceeds TIA/EIA RS-485 requirements

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.