MAX3232CPWR Datasheet PDF - TI

●The MAX3232CPWR is a Multichannel RS-232 Line Driver/Receiver, dual charge-pump circuit with ±15kV ESD protection terminal to terminal (serial-port connection terminals, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. The devices operate at data signalling rates up to 250kbps and a maximum of 30V/µs driver output slew rate.

● RS-232 bus terminal ESD protection exceeds ±15kV using human-body model (HBM)

● Meets or exceeds requirements of TIA/EIA-232-F and ITU V.28 standards

● Operates up to 250kbps

● Two drivers and two receivers

● 300µA Typical low supply current

● 4 x 0.1µF External capacitors

● Accepts 5V logic input with 3.3V supply

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.