OPA691IDBVT Datasheet PDF - TI

●The OPA691IDBVT is a wideband current feedback Operational Amplifier with disable function. The OPA691 sets a new level of performance for broadband current feedback op amp. Operating on a very low 5.1mA supply current, the OPA691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA691 can deliver a 1 to 4V output swing with over 150mA drive current and 190MHz bandwidth. This combination of features makes the OPA691 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver. The OPA691"s low 5.1mA supply current is precisely trimmed at 25°C. This trim, along with low drift over-temperature, ensures lower maximum supply current than competing products.

● 190mA High output current

● ±4.0V Output voltage swing

● 0.07%/0.02° Low dG/d

● 5.1mA Low supply current

● 150µA Low disable current

● 20µV/°C Typical offset drift

● 56dB Typical CMRR

● Green product and no Sb/Br