PIC16F876-20/SP Datasheet PDF - Microchip

●The PIC16F876-20/SP is a 8-bit 20MHz CMOS Flash-based Microcontroller. The PIC16F876 features 256 bytes of EEPROM data memory, self programming, an ICD, 5 channels of 10-bit Analogue-to-digital (A/D) converter, 2 additional timers, 2 capture/compare/PWM functions, the synchronous serial port can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and a Universal Asynchronous Receiver Transmitter (USART). The STATUS register contains the arithmetic status of the ALU, the RESET status and the bank select bits for data memory.

● High performance RISC CPU

● Only 35 single word instructions to learn

● All single-cycle instructions except for program branches which are two cycles

● Interrupt capability (up to 14 sources)

● Eight level deep hardware stack

● Direct, indirect and relative addressing modes

● Power-on reset (POR)

● Power-up timer (PWRT) and oscillator start-up timer (OST)

● Watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation

● Programmable code protection

● Power saving sleep mode

● Low power, high speed CMOS flash/EEPROM technology

● Fully static design

●ESD sensitive device, take proper precaution while handling the device.