SN65HVD08D Datasheet PDF - TI

●The SN65HVD08D is a 3.3/5V RS-485 Transceiver combines a 3-state differential line driver and differential line receiver designed for balanced data transmission and interoperation with ANSI TIA/EIA-485-A and ISO-8482E standard-compliant devices. The wide supply voltage range and low quiescent current requirements allow the SN65HVD08s to operate from a 5V power bus in the cable with as much as a 2V line voltage drop. Busing power in the cable can alleviate the need for isolated power to be generated at each connection of a ground-isolated bus.

● Consumes less than 90mW quiescent power

● Open-circuit, short-circuit and idle-bus fail safe receiver

● 1/8th Unit-load

● Bus-pin ESD protection exceeds 16kV HBM

● Driver output voltage slew-rate limited for optimum signal quality at 10Mbps

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.