SN65HVD72DGKR Datasheet PDF - TI

●The SN65HVD72DGKR is a 3.3V robust Half-duplex Driver and Receiver. The bus pins are robust to ESD events with high levels of protection to human-body model and IEC contact discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This device features a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs.

● >±15kV HBM Protection

● >±12kV IEC 61000-4-2 Contact discharge

● >±4kV IEC 61000-4-4 Fast transient burst

● Large receiver hysteresis (80mV) for noise rejection

● Low unit-loading allows over 200 connected nodes

● Low power consumption

● <2µA Low standby supply current

● ICC <1mA Quiescent during operation

● 5V Tolerant logic inputs compatible with 3.3 or 5V controllers

● Signalling rate optimized for 250kbps

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.