SN74ALVC16334DGVR Datasheet PDF - TI

●This 16-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.

●Data flow from A to Y is controlled by the output-enable (OE\\\\) input. The device operates in the transparent mode when the latch-enable (LE\\\\) input is low. When LE\ is high, the A data is latched if the clock (CLK) input is held at a high or low logic level. If LE\ is high, the A data is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE\ is high, the outputs are in the high-impedance state.

●To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.