STM32F334C8T6 Datasheet PDF - ST Microelectronics

●The STM32F334C8T6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 64kB and 16kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, three comparators, an operational amplifier, three DAC channels, four general-purpose 16-bit timers, one general-purpose 32-bit timer, as well as standard and advanced communication interfaces - one I²C, one SPI, three USARTs and a CAN.

● CRC calculation unit

● Power-on/Power-down reset (POR/PDR)

● Programmable voltage detector (PVD)

● Low-power modes - Sleep, stop, standby

● VBAT supply for RTC and backup registers

● 4 to 32MHz Crystal oscillator

● 32kHz Oscillator for RTC with calibration

● 8MHz Internal RC (up to 64 MHz with PLL option)

● 40kHz Internal oscillator

● Interconnect matrix

● 7-channel DMA Controller

● Temperature sensor

● Up to 18 capacitive sensing channels

● 2 x Watchdog timers (Independent and window)

● SysTick Timer

● Up to two 16-bit Basic timers to drive DAC

● Calendar RTC with alarm, periodic wakeup from stop

● CAN Interface (2.0 B Active) and one SPI

● Serial wire debug (SWD), JTAG

● 96-bit Unique ID