TPS23861PW Datasheet PDF - TI

●The TPS23861PW is a quad IEEE 802.3at Power-Over-Ethernet PSE Controller features an easy-to-use flexible IEEE802.3at PSE solution. As shipped, it automatically manages four 802.3at ports without the need for any external control. It automatically detects powered devices (PDs) that have a valid signature, determines power requirements according to classification and applies power. Two-event classification is supported for type-2 PDs. It supports DC disconnection and the external FET architecture allows designers to balance size, efficiency and solution cost requirements. The unique pin-out enables 2-layer PCB designs via logical grouping and clear upper and lower differentiation of I2C and power pins. This delivers best-in-class thermal performance, Kelvin accuracy and low-build cost. In addition to automatic operation, it supports semi-auto mode via I²C control for precision monitoring and intelligent power management.

● Auto detect, classification

● Auto turn-on and disconnect

● Efficient 255mR Sense resistor

● Pin-out enables two-layer PCB

● Kelvin current sensing

● 4-point Detection

● Automatic mode-as shipped

● No external terminal setting required

● No initial I²C communication required

● Semi-automatic mode-set by I2C command

● Continuous identification and classification

● Fast-port shutdown input

● Operates best when used in conjunction with system reference code

● Green product and no Sb/Br

●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.