TXB0102DCUT Datasheet PDF - TI

●DESCRIPTION/ORDERING INFORMATION

●This 2-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

●NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

●FEATURES

●• Available in the Texas Instruments NanoFree™ Packages

●• 1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)

●• VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High-Impedance

●State

●• OE Input Circuit Referenced to VCCA

●• Low Power Consumption, 4-µA Max ICC

●• Ioff Supports Partial-Power-Down Mode Operation

●• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II

●• ESD Protection Exceeds JESD 22

●– A Port

●– 2500-V Human-Body Model (A114-B)

●– 200-V Machine Model (A115-A)

●– 1500-V Charged-Device Model (C101)

●– B Port

●– 15-kV Human-Body Model (A114-B)

●– 200-V Machine Model (A115-A)

●– 1500-V Charged-Device Model (C101)