Web Analytics
Part Datasheet Search > Microcontrollers > ATTINY841 Datasheet PDF
Images are for reference

ATTINY841 Datasheet PDF

Part Series:
ATTINY841 Series
Category:
Microcontrollers
Description:
MCU 8Bit AVR RISC 8KB Flash 1.8V/2.5V/3.3V/5V 14Pin SOIC W T/R
Updated Time: 2023/01/13 01:38:10 (UTC + 8)

ATTINY841 Datasheet PDF Microcontrollers

20 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 8KB Flash 1.8V/2.5V/3.3V/5V 20Pin VQFN EP T/R
19 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 8KB Flash 1.8V/2.5V/3.3V/5V 20Pin VQFN EP Tray
19 Pages
ATMEL
MCU 8Bit ATtiny AVR RISC 8KB Flash 1.8V/2.5V/3.3V/5V 14Pin SOIC Tray
19 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 8KB Flash 1.8V/2.5V/3.3V/5V 20Pin MLF Tray

ATTINY841-SSUR Specifications

TYPE
DESCRIPTION
Frequency
16 MHz
Number of Pins
14 Pin
Case/Package
SOIC-14
Number of Positions
14 Position
Clock Speed
16.0 MHz
show more

ATTINY841-SSUR Function Overview

The ATTINY841-SSUR is a 8-bit high-performance picoPower AVR RISC-based Microcontroller combines 4kB ISP flash memory, 512B EEPROM, 128B SRAM, 12 general purpose I/O lines, 32 general purpose working registers, an 8-bit timer/counter with two PWM channels, two 16-bit timer/counters with two PWM channels, internal and external interrupts, an 12-channel 10-bit A/D converter, 2 On-chip analogue comparators, 2 full duplex USARTs with Start Frame wake up from power down, master/slave SPI serial interface, slave I²C serial interface, programmable gain stage (1x, 20x and 100x) for 12 differential ADC channel pairs, programmable watchdog timer with internal oscillator, internal calibrated oscillator and four software selectable power saving modes. The device operates between 1.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
Advanced RISC architecture - 120 powerful instructions, most single clock cycle execution
Non-volatile program and data memories
Peripheral features - Programmable ultra low power watchdog timer
Low power idle, ADC noise reduction, standby and power-down modes
Enhanced power-on reset circuit
Programmable brown-out detection circuit with supply voltage sampling
External and internal interrupt sources
Pin change interrupt on 12 pins
Calibrated 8MHz oscillator with temperature calibration option
Calibrated 32kHz ultra low power oscillator
High-current drive capability on 2 I/O pins
Low power consumption
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts