OPA2335 Datasheet PDF

●The OPA334 and OPA335 series of CMOS operational amplifiers use auto-zeroing techniques to simultaneously provide very low offset voltage (5µV max), and near zero drift over time and temperature. These miniature, high-precision, low quiescent current amplifiers offer high input impedance and rail-to-rail output swing. Single or dual supplies as low as +2.7V (±1.35V) and up to +5.5V (±2.75V) may be used. These op amps are optimized for low-voltage, single-supply operation.

●The OPA334 family includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to a standby current of 2µA. When the Enable pin is connected high, the amplifier is active. Connecting Enable low disables the amplifier, and places the output in a high impedance state.

●The OPA334 (single version with shutdown) comes in _Micro_SIZE SOT23-6. The OPA335 (single version without shutdown) is available in SOT23-5, and SO-8. The OPA2334 (dual version with shutdown) comes in _Micro_SIZE MSOP-10. The OPA2335 (dual version without shutdown) is offered in the MSOP-8 and SO-8 packages. All versions are specified for operation from –40°C to +125°C.

● LOW OFFSET VOLTAGE:5 µV (max)

● ZERO DRIFT: 0.05 µV/°C (max)

● QUIESCENT CURRENT: 285 µA

● SINGLE-SUPPLY OPERATION

● SINGLE AND DUAL VERSIONS

● SHUTDOWN

● _Micro_SIZE PACKAGES

● APPLICATIONS

● TRANSDUCER APPLICATIONS

● TEMPERATURE MEASUREMENT

● ELECTRONIC SCALES

● MEDICAL INSTRUMENTATION

● BATTERY-POWERED INSTRUMENTS

● HANDHELD TEST EQUIPMENT

●All trademarks are the property of their respective owners.