SN74HC164 Datasheet PDF

●These 8-bit shift registers feature AND-gated serial inputs and an asynchronous clear (CLR) input. The gated serial (A and B) inputs permit complete control over incoming data; a low at either input inhibits entry of the new data and resets the first flip-flop to the low level at the next clock (CLK) pulse. A high-level input enables the other input, which then determines the state of the first flip-flop. Data at the serial inputs can be changed while CLK is high or low, provided the minimum set-up time requirements are met. Clocking occurs on the low-to-high-level transition of CLK.

● Wide Operating Voltage Range of 2 V to 6 V

● Outputs Can Drive Up to 10 LSTTL Loads

● Low Power Consumption, 80-µA Maximum ICC

● Typical tpd = 20 ns

● ±4-mA Output Drive at 5 V

● Low Input Current of 1-µA Maximum

● AND-Gated (Enable/Disable) Serial Inputs

● Fully Buffered Clock and Serial Inputs

● Direct Clear

● On Products Compliant to MIL-PRF-38535,

●All Parameters Are Tested Unless Otherwise

●Noted. On All Other Products, Production

●Processing Does Not Necessarily Include

●Testing of All Parameters.