5962F9563002QYC Datasheet PDF - Intersil

●Rad-Hard 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection

●The HS-1840ARH, HS-1840BRH are radiation hardened, monolithic 16 channel multiplexers constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. They are designed to provide a high input impedance to the analog source if device power fails (open), or the analog signal voltage inadvertently exceeds the supply by up to ±35V, regardless of whether the device is powered on or off. Excellent for use in redundant applications, since the secondary device can be operated in a standby unpowered mode affording no additional power drain.

●Features

●• Electrically Screened to SMD # 5962-95630

●• QML Qualified per MIL-PRF-38535 Requirements

●• Pin-to-Pin for Intersil’s HS-1840RH and HS-1840/883S

●• Improved Radiation Performance

●\- Gamma Dose (γ) 3x105 RAD(Si)

●• Improved rDS(ON)Linearity

●• Improved Access Time 1.5µs (Max) Over Temp and Post Rad

●• High Analog Input Impedance 500MΩ During Power Loss (Open)

●•±35V Input Overvoltage Protection (Power On or Off)

●• Dielectrically Isolated Device Islands

●• Excellent in Hi-Rel Redundant Systems

●• Break-Before-Make Switching

●• No Latch-Up