●ACPL-C61L Digital CMOS Optocoupler that combines a AlGaAs light emitting diode with a integrated high gain photo detector addresses low power needs. The optocoupler consumes extremely low power, at maximum 1.5mA IDD across temperature. The forward current is as low as 3mA
●and thus allows direct current drive by most microprocessors.
●ACPL-C61L has internal clearance of 0.5 mm, and is UL recognized with isolation voltage of 5000 Vrms for 1 minute, and IEC/EN/DIN EN 60747-5-5 working insulation voltage VIORM of 1414 VPEAK for reinforced insulation.
●ACPL-C61L supports both 3.3V and 5V supply voltages with guaranteed AC and DC operational parameters from –40˚C to +105˚C. The output of the detector IC is a CMOS output. An enable input allows the detector output to be strobed. The internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs.
●ACPL-C61L is suitable for high speed logic interfacing, while consuming extremely low power.
●The ACPL-C61L Digtial CMOS Optocouplers are available in a stretched SO-8 package.
●### Features
● Ultra low current consumption IDD: 1.5mA max
● Low Input Current Capability: 3mA
● Built-in slew-rate controlled output
● Tri-state output with enable pin VE
● 20 kV/μs Minimum Common Mode Rejection (CMR) at VCM = 1000 V
● High Speed: 10 MBd min
● Guaranteed AC and DC performance over wide temperature: -40°C to +105°C
● Stretched SO8 package
● Internal Clearance: 0.5 mm
● Safety and Regulatory Approval
●\- UL 1577 recognized - 5000 V rms for 1 minute
●\- CSA Approval
●\- IEC/EN/DIN EN 60747-5-5 Approval for Reinforced Insulation
● Options available are:
●500 = Tape and Reel Packaging Option
●060 = IEC/EN/DIN EN 60747-5-5 VIORM = 1414 VPEAK
●XXXE = Lead Free Option
Part 3D Model
