●Product Details
●The AD7713 is a complete analog front end for low frequency measurement applications. The device accepts low level signals directly from a transducer or high level signals (4 × VREF ) and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time.
●The part features two differential analog inputs and one single-ended high level analog input as well as a differential reference input. It can be operated from a single supply (AVDD and DVDD at +5 V). The part provides two current sources which can be used to provide excitation in three-wire and four-wire RTD configurations. The AD7713 thus performs all signal conditioning and conversion for a single, dual or three-channel system.
●The AD7713 is ideal for use in smart, microcontroller-based systems. Gain settings, signal polarity and RTD current control can be configured in software using the bidirectional serial port. The AD7713 contains self-calibration, system calibration and background calibration options and also allows the user to read and to write the on-chip calibration registers.
●CMOS construction ensures low power dissipation and a hardware programmable power-down mode reduces the standby power consumption to only 150 µW typical. The part is available in a 24-pin, 0.3 inch wide, plastic and hermetic dual-in-line package (DIP) as well as a 24-lead small outline (SOIC) package.
●### Features and Benefits
● Charge Balancing ADC
●24 Bits No Missing Codes
●±0.0015% Nonlinearity
● Low-Pass Filter with Programmable Filter Cutoffs
● Ability to Read/Write Calibration Coefficients
● Bidirectional Microcontroller Serial Interface
● 3-Channel Programmable Gain Front End
●Gains from 1 to 128
●2 Differential Inputs
●1 Single-Ended High Voltage Input
● Single-Supply Operation
● Low Power (3.5 mW typ) with Power-Down Mode (150 µW typ)
Part 3D Model
