AD8336-EVALZ Datasheet PDF - ADI

●The AD8336-EVALZ is an evaluation board for AD8336 device. The AD8336 is a low noise, single ended, linear in dB, general purpose variable gain amplifier, usable over a large range of supply voltages. It features an uncommitted preamplifier with a usable gain range of 6dB to 26dB established by external resistors in the classical manner. The VGA gain range is 0dB to 60dB and its absolute gain limits are -26dB to +34dB. When the preamplifier gain is adjusted for 12dB, the combined 3dB bandwidth of the preamp and VGA is 100MHz, and the amplifier is fully usable to 80MHz. With ±5V supplies, the maximum output swing is 7Vpp. To change the value of the gain of the preamp or to change the gain polarity to inverting, alter the component values or install components in the alternate locations provided. All components are standard 0603 size.

● Low voltage noise of 3nV/√Hz and current noise of 3pA/√Hz

● Small signal BW of 115MHz

● Large signal BW of 2Vpp = 80MHz

● Slew rate of 550V/µs at 2Vpp

● Gain ranges (specified) of -14dB to +46dB and 0dB to 60dB

● Gain scaling of 50dB/V

● DC coupled

● Single ended input and output

● Supply range from ±3V to ±12V

●ESD sensitive device, take proper precaution while handling the device.