●Product Details
●The ADA4625-1 builds upon Analog Devices, Inc., industry leading high voltage, single-supply, rail-to-rail output (RRO), precision junction field effect transistor (JFET) input op amps, taking that product type to a level of speed and low noise that has not been made available to the market previously.
●The ADA4625-1 provides optimal performance in high voltage, high gain, and low noise applications. The input common-mode voltage range includes the negative supply, and the output swings rail to rail. This enables the user to maximize dynamic input range in low voltage, single supply applications without the need for a separate negative voltage power supply for ground sense.
●The combination of wide bandwidth, low noise, and low input bias current makes the ADA4625-1 especially suitable for phase-locked loop (PLL), active filter amplifiers and for high tuning voltage (VTUNE), voltage controlled oscillators (VCOs) and preamplifiers where low level signals require an amplifier that provides both high amplification and wide bandwidth.
●The ADA4625-1 is unity-gain stable, and there is no phase reversal when input range exceeds either supply rail by 200 mV. The output is capable of driving loads up to 1000 pF and/or 600 Ω loads.
●The ADA4625-1 is specified for operation over the extended industrial temperature range of −40°C to +125°C and operates from +5 V to +36 V (±2.5 V to ±18 V) with specifications at +5 V and ±18 V. The ADA4625-1 is available in 8-lead SOIC package with an exposed pad (EPAD).
●Applications
● PLL filter amplifiers
● Transimpedance amplifiers
● Photodiode sensor interfaces
● Low noise charge amplifiers
●### Features and Benefits
● Wide gain bandwidth product: 18 MHz typical
● High slew rate: 48 V/μs typical
● Low voltage noise density: 3.3 nV/√Hz typical at 1 kHz
● Low peak-to-peak noise: 0.15 μV p-p, 0.1 Hz to 10 Hz
● Low input bias current: ±15 pA typical at TA = 25°C
● Low offset voltage: ±80 μV maximum at TA = 25°C
● Offset voltage drift: ±1.2 μV/°C maximum at TA = −40°C to 85°C
● Fast settling: 0.01% in 700 ns typical
● Wide range of operating voltages
● Dual-supply operation: ±2.5 V to ±18 V
● Single-supply operation: 5 V to 36 V
● Input voltage range includes V−
● Rail-to-rail output
● High capacitive load drive capability
● Output short-circuit current: ±46 mA
● No phase reversal
● Unity-gain stable
Part 3D Model
