●Product Details
●The ADM1490E/ADM1491E are RS-485 transceivers with ±8 kV ESD protection and is suitable for high speed, full-duplex communication on multipoint transmission lines. In particular, the ADM1491E is designed for use in motor control applications requiring communications at data rates up to 16 Mbps.
●The ADM1491E is designed for balanced transmission lines and complies with TIA/EIA-485-A-98. The device has a 12 kΩ receiver input impedance for unit load RS-485 operation allowing up to 32 nodes on the bus.
●The differential transmitter outputs and receiver inputs feature electrostatic discharge circuitry that provides protection to ±8 kV using the human body model (HBM).
●The ADM1491E operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or output shorting is prevented by short-circuit protection and thermal circuitry.
●Short-circuit protection circuits limit the maximum output current to ±250 mA during fault conditions. A thermal shutdown circuit senses if the die temperature rises above 150°C and forces the driver outputs into a high impedance state under this condition.
●The receiver of the ADM1491E contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
●The ADM1491E features extremely fast and closely matched switching times. Minimal driver propagation delays permit transmission at data rates up to 16 Mbps while low skew minimizes EMI interference.
●The ADM1491E is fully specified over the commercial and industrial temperature ranges and is available in two packages: a narrow-body 14-lead SOIC and a 10-lead MSOP.
●APPLICATIONS
● RS-485/RS-422 interfaces
● Industrial field networks
● High data rate motor controlv
● Multipoint data transmission systems
● Single-ended to differential signal conversion
●### Features and Benefits
● RS-485/RS-422 full duplex transceiver, for high speed motor control applications
● 16 Mbps data rate
● ±8 kV ESD protection on RS-485 input/output pins
● Complies with ANSI/TIA/EIA-485-A-1998
● Open circuit fail-safe
● Suitable for 5 V power supply applications
● 32 nodes on the bus (1 unit load)
● Thermal shutdown protection
● Operating temperature range: −40°C to +85°C
● Packages
●Narrow-body 14-lead SOIC
●10-lead MSOP
