●Product Details
●The ADM3095E is a 3.0 V to 5.5 V, 2.5 Mbps, RS-485 transceiver that features up to ±42 V ac/dc peak bus overvoltage fault protection on the RS-485 bus pins. This device is designed to withstand overvoltage faults, such as short circuits directly to power supplies, and overvoltage faults, such as ±24 V ac supplies connected in error to the RS-485 A and B bus pins. The ADM3095E is an RS-485 transceiver that integrates IEC 61000-4-5 Level 4 surge protection, allowing up to ±4 kV protection on the RS-485 bus pins. The device has IEC 61000-4-4 Level 4 electrical fast transient (EFT) protection up to ±2 kV, and IEC 61000-4-2 Level 4 electrostatic discharge (ESD) protection on the bus pins, allowing the device to withstand up to ±15 kV on the transceiver interface pins without latch-up or damage.
●This device has an extended common-mode input voltage range of ±25 V to improve data communication reliability in noisy environments over long cable lengths where ground loop voltages are possible. The combination of extended common-mode input voltage range, overvoltage fault protection, surge protection, EFT protection, and ESD protection make the ADM3095E a completely integrated electromagnetic compatibility (EMC) protected RS-485 transceiver.
●The ADM3095E also features a logic supply pin, VIO, for a flexible digital interface, operational to voltages as low as 1.62 V. The ADM3095E is PROFIBUS® compliant with a high driver differential output voltage, VOD, of 2.1 V minimum at power supply voltages greater than 4.5 V. The device is fully characterized over extended operating temperature ranges, with options of −40°C to +125°C, and is available in a 16-lead, narrow body SOIC package..
●Applications
● Heating ventilation and air conditioning (HVAC) networks
● Industrial field buses
● Building automation
● Utility networks
●### Features and Benefits
● Certified Level 4 EMC protection on RS-485 A and B bus pins
● IEC 61000-4-5 surge protection (±4 kV)
● IEC 61000-4-4 EFT protection (±2 kV)
● IEC 61000-4-2 ESD protection
● ±8 kV contact discharge
● ±15 kV air gap discharge
● Certified IEC 61000-4-6 conducted RF immunity (10 V/m rms)
● RS-485 A and B bus pins HBM ESD >±30 kV
● ±42 V ac/dc peak fault protection on RS-485 bus pins
● TIA/EIA RS-485 compliant over full supply range
● 3.0 V to 5.5 V operating voltage range on VCC
● 1.62 V to 5.5 V VIO logic supply
● Common-mode input range: −25 V to +25 V
● 2.5 Mbps data rate, maximum
● Half duplex
● PROFIBUS compliant at 4.5 V VCC
● Receiver short-circuit, open-circuit, and floating input fail-safe
● Supports 256 bus nodes (96 kΩ receiver input resistance)
● −40°C to +125°C temperature option
● Glitch free power-up and power-down (hot swap)
● 16-lead narrow body SOIC package
Part 3D Model
