●Product Details
●The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16_g_. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
●The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 m_g_/LSB) enables measurement of inclination changes less than 1.0°.
●Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention.
●Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.
●The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package.
● ADXL345-EP Supports defense and aerospace applications (AQEC)
●### Features and Benefits
● Ultralow power: as low as 23 μA in measurement mode and 0.1 μA in standby mode at VS = 2.5 V (typical)
● Power consumption scales automatically with bandwidth
● User-selectable resolution
● Fixed 10-bit resolution
● Full resolution, where resolution increases with _g_ range, up to 13-bit resolution at ±16 _g_ (maintaining 4 mg/LSB scale factor in all _g_ ranges)
● See data sheet for additional features.
●ADXL345-EP supports defense and aerospace applications (AQEC standard)
● Download ADXL345-EP data sheet (pdf)
● Extended industrial temperature range: (−55°C to +105°C)
● Controlled manufacturing baseline
● One assembly/test site
● One fabrication site
● Enhanced product change notification
● Qualification data available on request
● V62/12657 DSCC Drawing Number
Part 3D Model
