ATSAMA5D35-EK Datasheet PDF - ATMEL

●ATSAMA5D35-EK evaluation kit is a fully featured evaluation platform for SAMA5D35 embedded microprocessor. The SAMA5D3 series is a high performance, power efficient embedded MPU based on the ARM Cortex-A5 processor, achieving 536MHz with power consumption levels below 0.5mW in low power mode. The evaluation kit allows users to extensively evaluate, prototype and create application specific designs. The kit consists of a main board and a computer module equipped with a SAMA5D35 processor. The main board (MB) provides all the interface connectors required to attach the system to the application specific peripherals. The computer module (CM) board, is a single board computer that integrates all the core components and is mounted onto an application specific main board (MB). It is supported by the SAMA5D3 Softpack, a free set of bare metal C examples, and is delivered with on board demos for Linux and Qt-based GUI.

● SAMA5D35 embedded MPU running at 536MHz in a BGA324 package

● 4GB DDR2, 2GB NAND Flash, 128MB NOR , 32Mb SPI Serial DataFlash, 512Kb EEPROM

● JLink and CDC on board, optional JTAG test access port

● MII/RMII Ethernet 10/100 w/PHY

● RGMII Ethernet 1Gb w/PHY

● Four wire RS232, HDMI interface, two CAN connectors

● Two USB 2.0 Hosts, one USB 2.0 Host/Device

● Conexant CX20548 SmartDAA for soft modem implementation

● MicroSD card slot

● ISI interface for connection to a CMOS sensor

●Strongly recommend using a grounding strap or similar ESD protective device when handling the board in hostile ESD environments.