BQ24630RGET Datasheet PDF - TI

●The BQ24630RGET is a highly integrated lithium phosphate switched-mode Battery Charge Controller offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation and charge status monitoring. The BQ24630 charges the battery in three phases: preconditioning, constant current and constant voltage. Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. It automatically restarts the charge cycle if the battery voltage falls below an internal threshold and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.

● ±0.5% Charge voltage accuracy

● ±3% Charge current accuracy

● ±3% Adapter current accuracy

● High-accuracy voltage and current regulation

● Automatic system power selection from adapter or battery

● Internal loop compensation

● Internal soft start

● Input overvoltage protection

● Battery detection

● Charge overcurrent protection

● Battery short protection

● Battery overvoltage protection

● Thermal shutdown

● Green product and no Sb/Br

●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.