●The bq2501x series are highly integrated charge andpower management devices targeted at space-limited bluetooth applications. The bq2501x series offer integrated power FET and current sensor for charge control, reverse blocking protection, high accuracy current and voltage regulation, charge status, charge termination, and a highly efficient and low-power dc-dc converter in a small package.
●The bq2501x charges the battery in three phases: conditioning, constant current and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bq2501x automatically re-starts the charge if the battery voltage falls below an internal threshold. The bq2501x automatically enters sleep mode when VCC supply is removed.
●The integrated low-power high-efficiency dc-dc converter is designed to operate directly from a single-cell Li-Ion or Li-Pol battery pack. The output voltage is either adjustable from 0.7 V to VBAT (bq25010), fixed at 3.3 V (bq25011), or fixed at 1.8 V (bq25012), and is capable of delivering up to 150-mA of load current. The dc-dc converter operates at a synchronized 1 MHz switching frequency allowing for the use of small inductors.
● Li-Ion Or Li-Pol ChargeManagement and Synchronous DC-DC Power Conversion In a Single Chip
● Optimized for Powering Bluetooth™ Headsets and Accessories
● Charges and Powers the System from Either the AC Adapter or USB with Autonomous Power Source Selection
● Integrated USB Charge Control with Selectable 100 mA and 500 mA Charge Rates
● Integrated Power FET and Current Sensor for Up to 500 mA Charge Applications
●AND
● 100 mA DC-DC Controller with Integrated FETs
● Reverse Leakage Protection Prevents Battery Drainage
● Automatic Power Save Mode For High
●Efficiency at Low Current, or Forced PWM for Frequency Sensitive Applications
● 3.5 mm × 4.5 mm QFN Package
● APPLICATIONS
● Bluetooth™ Headsets
● Bluetooth™ Accessories
● Low-Power Handheld Devices
●Bluetooth is a trademark of Bluetooth SIG, Inc.
Part 3D Model
