●| |
●###
●Relay~ Crystal Can~ Welded~ DPDT~ Dry Circuit to 5 Amps
●---
●|
●---
●|
●###
●General
●---
●Designed to meet the requirements of MIL-PRF-39016.
●Contact Arrangement:
●4PDT (4 Form C)
●Weight:
● 0.3 oz max.
●###
●Performance
●Contact Rating:
●For case grounded loads and other ratings~ consult the factory.
●Resistive
●Case Ungrounded
●2 Amps @ 28 VDC or 115V 400 Hz
●0.5 Amp @ 115V 60 + 400 Hz
●Inductive:
● 0.5 Amp @ 28 VDC
●Lamp:
● 0.1 Amp @ 28 VDC
●Low Level:
●10-50µA @ 10-50 mv DC or peak AC
●Relay contacts which have switched high level currents are no
●longer suitable for switching low level loads.
●Life:
●100~000 operations minimum @ rated load~ 125°C
●Pull In Power:
● 250 mw approx.
●Operate/Release Time:
● 4 ms max~ excluding bounce time at nominal coil voltage
●Contact Bounce Time:
●2 ms max @ 1 Amp
●Contact Resistance:
●Before Life :
●0.050 Ohms max @ 1 Amp and 6 VDC
●After Life:
● 0.150 Ohms max @ 1 Amp and 6 VDC
●###
●Environmental
●Temperature Range:
● -65°C to +125°C
●Vibration:
● 0.4" DA 10 - 38 Hz~ 20 G"s 38 - 2~000 Hz
●For applications requiring other vibration levels~ consult the factory.
●Shock (Operating):
●50 G"s 11 ms
●For applications requiring other shock levels~ consult the factory..
●###
●Electrical
●Duty Cycle:
● Continuous
●Insulation Resistance:
●at 500V 25°C:
●10~000 megohms
●at 500V 125°C:
● 1~000 megohms
●Dielectric Strength:
●Sea Level:
●Contact to Case
●1~000 VRMS
●Contact to Coil
●1~000 VRMS
●Coil to Case
● 500 VRMS
●Across Open Contacts
● 1~000 VRMS
●70~000 Feet:
●All points
●350 VRMS
●Notes
●| • For case grounded loads and other ratings~ consult the factory.
●---
●• For applications requiring other shock and vibration levels~ consult the factory
●• For other ratings consult the factory.
●• Relay contacts which have switched high level currents are no longer suitable for switching low level loads.
●Part Number
●|
●Model BR13 — 5 Amps (250 MW) Model BR13H — 3 Amps (100 MW) Model BR13K — 2 Amps (40 MW)
●---
● | Nominal Coil Voltage | Maximum Coil Voltage | Pull In Voltage (MAX @ +125°C) | Pull In Voltage (MAX) | Drop Out Voltage (MIN) | BR13
●Coil Resistance ± 10% At 25°C | BR13H
●Coil Resistance± 10% At 25°C | BR13K
●Coil Resistance± 10% At 25°C
●BR13-36( )( )-6V
●BR13H-85( )( )-6V
●BR13K-220( )( )-6V | 6 VDC | 7.3 VDC | 4.4 VDC | 3 VDC | 0.3 VDC | 36 OHMS | 85 OHMS | 220 OHMS
●BR13-140( )( )-12V
●BR13H-350( )( )-12V
●BR13K-850( )( )-12V | 12 VDC | 14.8 VDC | 8.4 VDC | 6 VDC | 0.6 VDC | 140 OHMS | 350 OHMS | 850 OHMS
●BR13-675( )( )-26V
●BR13H-1.6K( )( )-26V
●BR13K-4K( )( )-26V | 26 VDC | 32 VDC | 18 VDC | 13 VDC | 1.3 VDC | 675 OHMS | 1600 OHMS | 4000 OHMS
●BR13-12K( )( )-115V
●BR13H-28K( )( )-115V
●BR13K-40K( )( )-115V | 115 VDC | 127 VDC | 79 VDC | 57.5 VDC | 5.7 VDC | 12K OHMS | 28K OHMS | 40K OHMS (MAX.)
●Schematic Terminal Views
● Numbers for reference only.
●---
●| | |
●Terminal Styles
●---
●Code C:
● Plug-in~ tin plated
●|
●Code B:
● Solder hooks
●| |
●Code C:
● 3" Printed circuit leads
●(Preformed leads available)
●| | |
●Mounting Codes
●---
●Code 1:
● Plain can
●|
●Code 2:
● Face flanges
●| |
●Code 9:
● Side flanges
●| | |
●General Notes
●---
●• Unless otherwise specified~ all tests made at nominal coil voltages~ @ 25ºC.
●---
●• For special coil variations~ switching configurations~ terminals styles~ and mounting types~ consult the factory.
●• Unless otherwise specified~ tolerances on decimal dimensions are ± .010".
●• Specifications contained herein are subject to change without notice.
