CAT5241WI-10-TE13 Datasheet PDF - Catalyst

●DESCRIPTION

●The CAT5241 is four Digitally Programmable Potentiometers (DPPs™) integrated with control logic

●and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A separate 6-bit control register

●FEATURES

●■Four linear-taper digitally programmable potentiometers

●■64 resistor taps per potentiometer

●■End to end resistance 2.5kΩ, 10kΩ, 50kΩor 100kΩ

●■Potentiometer control and memory access via 2-wire interface (I2C like)

●■Low wiper resistance, typically 80Ω

●■Nonvolatile memory storage for up to four wiper settings for each potentiometer

●■Automatic recall of saved wiper settings at power up

●■2.5 to 6.0 volt operation

●■Standby current less than 1µA

●■1,000,000 nonvolatile WRITE cycles

●■100 year nonvolatile memory data retention

●■20-lead SOIC and TSSOP packages

●■Industrial temperature range