●The
●CC2431
● is a true System-On-Chip (SOC) for wireless sensor networking ZigBee®/IEEE 802.15.4 solutions. The chip includes a location detection hardware module that can be used in so-called blind nodes (i.e. nodes with unknown location) to receive signals from nodes with known locations. Based on this the location engine calculates an estimate of a blind nodes position. The
●CC2431
● enables ZigBee® nodes to be built with very low total bill-of-material costs. The
●CC2431
● combines the excellent performance of the leading
●CC2420
● RF transceiver with an industry-standard enhanced 8051 MCU, 128 KB flash memory, 8 KB RAM and many other powerful features. Combined with the industry leading ZigBee® protocol stack (Z-Stack™) from Texas Instruments, the
●CC2431
● provides the markets most competitive ZigBee® solution.
●The
●CC2431
● is highly suited for systems where ultra low power consumption is required. This is achieved by various operating modes. Short transition times between these modes further ensure low power consumption.
● Location Engine calculates the location of a node in a network
● High performance and low power 8051 microcontroller core.
● 2.4 GHz IEEE 802.15.4 compliant RF transceiver (industry leading
●CC2420
● radio core.
● ZigBee® protocol stack (Z-Stack™) from Texas Instruments includes support for
●CC2431
●s location engine.
● Excellent receiver sensitivity and robustness to interferers
● 128 KB in-system programmable flash
● 8 KB RAM, 4 KB with data retention in all power modes
● Powerful DMA functionality
● Very few external components
● Only a single crystal needed for mesh network systems
● Low current consumption (RX: 27mA, TX: 27mA, microcontroller running at 32 MHz)
● Only 0.5µA current consumption in power-down mode, where external interrupts or the RTC can wake up the system
● 0.3µA current consumption in power-down mode, where external interrupts can wake up the system
● Very fast transition times from low-power modes to active mode enables ultra low average power consumption in low duty-cycle systems
● CSMA/CA hardware support
● Wide supply voltage range (2.0V - 3.6V)
● Digital RSSI / LQI support
● Battery monitor and temperature sensor
● ADC with up to eight inputs and configurable resolution
● 128-bit AES security coprocessor
● Two powerful USARTs with support for several serial protocols.
● Hardware debug support
● Watchdog timer
● One IEEE 802.15.4 MAC Timer, one general 16-bit timer and two 8-bit timers
● RoHS compliant 7x7mm QLP48 package
● 21 general I/O pins, two with 20mA sink/source capability
● Powerful and flexible development tools available
● Applications
● ZigBee® systems
● 2.4 GHz IEEE 802.15.4 systems
● Home/building automation
● Industrial Control and Monitoring
● Low power wireless sensor networks
● Access Control
● PC peripherals
● Set-top boxes and remote controls
● Consumer Electronics
● Container/Vehicle Tracking
● Active RFID
● Inventory Control
