●The DAC7513 is a low-power, single, 12-bit buffered voltage output Digital-to-Analog Connector (DAC).The on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7513 uses a versatile 3-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI, QSPI, Microwire, and DSP interfaces.
●The DAC7513 requires an external reference voltage to set the output range of the DAC, this allows the DAC7513 to be used in a multiplying mode. The DAC7513 incorporates a power-on reset circuit which ensures that the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC7513 contains a power-down feature, accessed over the serial interface, that reduces the current consumption of the device to 200nA at 5V.
●The low-power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 0.5mW at 5V reducing to 1 µW in power-down mode.
●The DAC7513 is available in an SOT23-8 package and an MSOP-8 package.
● _micro_POWER OPERATION: 115 µA at 5V
● POWER-ON RESET TO ZERO
● POWER SUPPLY: +2.7V to +5.5V
● ENSURED MONOTONIC BY DESIGN
● SETTLING TIME: 10 µs to 1LSB
● LOW-POWER SERIAL INTERFACE WITH SCHMITT-TRIGGERED INPUTS
● ON-CHIP OUTPUT BUFFER AMPLIFIER, RAIL-TO-RAIL OPERATION
● SYNC\ INTERRUPT FACILITY
● SOT23-8 AND MSOP-8 PACKAGES
● APPLICATIONS
● PROCESS CONTROL
● DATA ACQUISITION SYSTEMS
● CLOSED-LOOP SERVO-CONTROL
● PC PERIPHERALS
● PORTABLE INSTRUMENTATION
● PROGRAMMABLE ATTENUATION
●SPI and QSPI are registered trademarks of Motorola.
●Microwire is a registered trademark of National Semiconductor.
