DS100DF410 Datasheet PDF - TI

●The DS100DF410 is four channel retimers with integrated signal conditioning. Each channel can independently lock to 10.3125 Gbps data rate to support 10GbE. The device includes a fully adaptive Continuous-Time Linear Equalizer (CTLE), Clock and Data Recovery (CDR) and transmit De-Emphasis (DE) driver. The DS100DF410 also includes a self calibrating 5-tap Decision Feedback Equalizer (DFE) to enable data transmission over long, lossy and crosstalk-impaired highspeed serial links to achieve BER < 1 × 10–15.

●The programmable settings can be applied easily using the SMBus (I2C) interface, or they can be loaded via an external EEPROM. An on-chip eye monitor and a PRBS generator allow real-time measurement of high-speed serial data for system bring-up or field tuning. Flow-through pinout and single power supply make the DS100DF410 easy to use.

● Each Channel Independently Locks to 10.3125 Gbps

● Lock Operation (typically under 15 ms)

● Low Latency (∼300 ps)

● Adaptive Equalization up to 34 dB Boost at 5 GHz

● Adjustable Transmit VOD: 600 to 1300 mVp-p

● Adjustable Transmit De-emphasis to –12 dB

● Typical Power Dissipation (EQ+DFE+CDR+DE): 180 mW/channel

● Programmable Output Polarity Inversion

● Input Signal Detection, CDR Lock Detection/Indicator

● On-chip Eye Monitor (EOM), PRBS Generator

● Single 2.5 V ±5% Power Supply

● SMBus/EEPROM Configuration Modes

● Operating Temperature Range of –40°C to 85°C

● WQFN 48-Pin, 7 mm × 7 mm Package

● Easy Pin Compatible Upgrade Between Repeater and Retimers

● DS100RT410 (EQ+CDR+DE): 10.3125 Gbps

● DS100DF410 (EQ+DFE+CDR+DE): 10.3125 Gbps

● DS110RT410 (EQ+CDR+DE): 8.5–11.3 Gbps

● DS110DF410 (EQ+DFE+CDR+DE): 8.5–11.3 Gbps

● DS125RT410 (EQ+CDR+DE): 9.8–12.5 Gbps

● DS125DF410 (EQ+DFE+CDR+DE): 9.8–12.5 Gbps

● DS100BR410 (EQ+DE): Up to 10.3125 Gbps