●Description
●The EN5330 is a Power System on a Chip DC-DC converter. It is specifically designed to meet the precise voltage and fast transient requirements of present and future high-performance, low-power processor, DSP, FPGA, memory boards and system level applications in a distributed power architecture. Advanced circuit techniques, ultra high switching frequency, and very advanced, high-density, integrated circuit and proprietary inductor technology deliver high-quality, ultra compact, non-isolated DC DC conversion. Operating this converter requires only three external components that include small value input and output ceramic capacitors and a soft-start capacitor.
●Features
●• Up to 10W output power (at VOUT=3.3V)
●• External inductor is NOT required
●• Lead-Free packaging
●• 5MHz operating frequency
●• More than 90% efficient
●• VOUT accuracy of 2% over line, load and temperature
●• 1/3 the board area of discrete component solutions
●• Very fast transient response
●• All high speed switching signals contained inside the part
●• Wide input voltage range of 2.375V to 5.5V
●• Digital voltage selector with options for common output voltages from 0.8V to 3.3V
●• External resistor divider and OVP option for output voltages from 0.8V to VIN-600mV
●• Output enable pin and Power OK signal
●• Programmable soft-start time
●• Over-current protection
●• Thermal shutdown, short circuit, output over voltage and input under-voltage protection
●Applications
●• Servers, workstations and PCs
●• Broadband, networking, LAN/WAN, optical telecommunications equipment
●• Point of load regulation for low-power processors, network processors, DSPs, FPGAs, and ASICs
●• Low voltage, distributed power architectures with 2.5V, 3.3V or 5V rails
