FNB51060TD1 Datasheet PDF - ON Semiconductor

●FNB51060TD1 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module"s robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

●Features

●---

● |

● UL Certified No. E209204 (UL1557)

● 600 V - 10 A 3-Phase IGBT Inverter Including Control IC for Gate Drive and Protections

● Low-Loss, Short-Circuit Rated IGBTs

● Built-In Bootstrap Diodes in HVIC

● Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing

● Active-HIGH interface, works with 3.3 / 5 V Logic, Schmitt-trigger Input

● HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection

● Fault Output for Under-Voltage and Short-Circuit Current Protection

● Inter-Lock Function to Prevent Short-Circuit

● Shut-Down Input

● HVIC Temperature-Sensing Built-In for Temperature Monitoring

● Optimized for 15 - 20 kHz Switching Frequency

● Isolation Rating: 1500 Vrms / min.