FT240XQ Datasheet PDF - FTDI Chip

●The FT240XQ is an USB 2.0 Full-speed IC, offers a compact bridge to 8-bit wide FIFO interfaces. The device is a FIFO, capable of operating up to 1Mbps, with low power consumption (8mA). The IC includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a 8-bit wide FIFO interface.

● Entire USB protocol handled on chip, no USB specific firmware programming required

● Fully integrated 2048-byte MTP memory for storing device descriptors and CBUS I/O configuration

● Fully integrated clock generation with no external crystal required

● Data transfer rates to 1Mbps

● 512-byte receive buffer and 512-byte transmit buffer utilising buffer smoothing technology

● FTDI"s royalty-free virtual com port (VCP) and direct (D2XX) drivers

● Configurable CBUS I/O pins

● Transmit and receive LED drive signals

● Synchronous and asynchronous bit bang interface options with RD# and WR# strobes

● Battery charger detection

● Device supplied pre-programmed with unique USB serial number

● Supports bus powered, self powered and high-power bus powered USB configurations

● Integrated +3.3V level converter for USB I/O

● True 3.3V CMOS drive output and TTL input

● Configurable I/O pin output drive strength

● Integrated power-on-reset circuit

● Low USB bandwidth consumption

● UHCI/OHCI/EHCI host controller compatible

● USB 2.0 full-speed compatible

● Extended operating temperature range

●ESD sensitive device, take proper precaution while handling the device.