FT8010UMX Datasheet PDF - ON Semiconductor

●The FT8010 is a timer for resetting a mobile device where long reset times are needed. The long time delay helps avoid unintended resets caused by accidental key presses. Two delays can be selected by hard-wiring the DSR pin: 7.5 ±20% seconds or 11.25 ±20% seconds.The FT8010 has two identical inputs for single or dual switch resetting capability. The device has two outputs: a push-pull output with 0.5mA drive and an open-drain output with 0.5mA pull-down drive. current when inactive and functions over a wide power supply range of 2.0V to 5.0V.

●Features

●---

● |

● Long Delay Configurable to 7.5 or 11.25 Seconds

● Primary and Secondary Input Reset Pins

● Push-Pull and Open-Drain Output Pins

● 2.0V to 5.0V Operation

● Packaged in 10-Lead UMLP (1.4mm x 1.8mm) and 8-Lead MLP (2.0mm x 2.0mm) Packages