●DESCRIPTION
●The IDT82V2041E can be configured as a single channel T1, E1 or J1 Line Interface Unit. The IDT82V2041E performs clock/data recovery, AMI/B8ZS/HDB3 line decoding and detects and reports the LOS conditions. An integrated Adaptive Equalizer is available to increase the receive sensitivity
●and enable programming of LOS levels. In transmit path, there is an AMI/B8ZS/HDB3 encoder and Waveform Shaper.
●FEATURES
●ï Single channel T1/E1/J1 short haul line interfaces
●ï Supports HPS (Hitless Protection Switching) for 1+1 protection
●without external relays
●ï Programmable T1/E1/J1 switchability allowing one bill of ma
●terial for any line condition
●ï Single 3.3 V power supply with 5 V tolerance on digital interfaces
●ï Meets or exceeds specifications in
●\- ANSI T1.102, T1.403 and T1.408
●\- ITU I.431, G.703, G.736, G.775 and G.823
●\- ETSI 300-166, 300-233 and TBR12/13
●\- AT&T Pub 62411
●ï Software programmable or hardware selectable on:
●\- Wave-shaping templates
●\- Line terminating impedance (T1:100 Ω, J1:110 Ω, E1:75 Ω/120 Ω)
●\- Adjustment of arbitrary pulse shape
●\- JA (Jitter Attenuator) position (receive path or transmit path)
●\- Single rail/dual rail system interfaces
●\- B8ZS/HDB3/AMI line encoding/decoding
●\- Active edge of transmit clock (TCLK) and receive clock (RCLK)
●\- Active level of transmit data (TDATA) and receive data (RDATA)
●\- Receiver or transmitter power down
●\- High impedance setting for line drivers
●\- PRBS (Pseudo Random Bit Sequence) generation and detection with 215-1 PRBS polynomials for E1
●\- QRSS (Quasi Random Sequence Signals) generation and detection with 220-1 QRSS polynomials for T1/J1
●\- 16-bit BPV (Bipolar Pulse Violation) /Excess Zero/PRBS or QRSS error counter
●\- Analog loopback, Digital loopback, Remote loopback and Inband loopback
●ï Adaptive receive sensitivity up to -20 dB (Host Mode only)
●ï Short circuit protection and internal protection diode for line drivers
●ï LOS (Loss Of Signal) detection with programmable LOS levels(Host Mode only)
●ï AIS (Alarm Indication Signal) detection
●ï Supports serial control interface,Motorola and Intel Multiplexed interfaces and hardware control mode
●ï Pin compatibe to 82V2081 T1/E1/J1 Long Haul/Short Haul LIU and 82V2051E E1 Short Haul LIU
●ï Package:
●Available in 44-pin TQFP packages
●Green package options available
Part 3D Model
