INA300-Q1 Datasheet PDF - TI

●Description

●The INA300-Q1 is a high common-mode, current-sensing comparator that is configured to detect overcurrent conditions through measuring the voltage developed across a current sensing or shunt resistor. The device can measure this differential voltage signal on common-mode voltages that can vary from 0 V up to 36 V, independent of the supply voltage. The device features an adjustable threshold range that is set using a single external limit-setting resistor. A selectable hysteresis feature enables adjustable operation of the comparator to accommodate the wide input signal range of 0 mV to 250 mV.

●Features

●• Qualified for Automotive Applications

●• AEC-Q100 Qualified With the Following Results:

●– Device Temperature Grade 1: –40°C to

●+125°C Ambient Operating Temperature

●– Device HBM ESD Classification Level 2

●– Device CDM ESD Classification Level C6

●• Wide Common-Mode Range: 0 V to 36 V

●• Selectable Response Times:

●– 10 µs, 50 µs, 100 µs

●• Programmable Threshold:

●– Adjustable Using a Single Resistor

●– Programmable from 0 mV to 250 mV

●• Accuracy:

●– Offset Voltage: ±500 μV (Max)

●– Offset Voltage Drift: 0.5 μV/°C (Max)

●• Selectable Hysteresis:

●– 2 mV, 4 mV, 8 mV

●• Active Quiescent Current: 135 μA (Max)

●• Open-Drain Output with Latch Mode Available

●Applications

●• Body Control Module

●• Motor Control

●• Valve Control

●• Central Control Module