●The LM1205A/LM1207A is a very high frequency video amplifier system intended for use in high resolution RGB monitor applications. In addition to the three matched video amplifiers, the LM1205A/LM1207A contains three gated single ended input black level clamp comparators for brightness control, three matched DC controlled attenuators for contrast control, and three DC controlled sub-contrast attenuators providing gain trim capability for white balance. All DC control inputs offer high input impedance and an operation range from 0V to 4V for easy interface to bus controlled alignment systems. The LM1205A/LM1207A also contains a blanking circuit which clamps the video output voltage during blanking to within 0.1V above ground. This feature provides blanking capability at the cathodes of the CRT. A spot killer is provided for CRT phosphor protection during power-down.
● Three wideband video amplifiers 130 MHz (LM1205A) @ 3 dB (4 VPP output)
● Matched (±0.1 dB or 1.2%) attenuators for contrast control
● ESD susceptibility above 3 kV
● Three externally gated single ended input comparators for cutoff and brightness control
● 0V to 4V, high input impedance DC contrast control (>40 dB range)
● 0V to 4V, high input impedance DC drive control for each video amplifier (6 dB to 0 dB range)
● Spot killer, blanks output when VCC < 10.6V
● Capable of 7 VPP output swing (slight reduction in bandwidth)
● Output stage blanking
● Output stage directly drives most hybrid or discrete CRT drivers
