●The LM5041 PWM controller contains all of the features necessary to implement either current-fed or voltage-fed push-pull or bridge power converters. These “Cascaded” topologies are well suited for multiple output and higher power applications. The LM5041’s four control outputs include: the buck stage controls (HD and LD) and the push-pull control outputs (PUSH and PULL). Push-pull outputs are driven at 50% nominal duty cycle at one half of the switching frequency of the buck stage and can be configured for either a specified overlap time (for current-fed applications) or a specified both-off time (for voltage-fed applications). Push-pull stage MOSFETs can be driven directly from the internal gate drivers while the buck stage requires an external driver such as the LM5102. The LM5041 includes a high-voltage start-up regulator that operates over a wide input range of 15V to 100V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 1 MHz and total propagation delays of less than 100ns. Additional features include: line Under-Voltage Lockout (UVLO), soft-start, an error amplifier, precision voltage reference, and thermal shutdown.
● Internal Start-up Bias Regulator
● Programmable Line Under-Voltage Lockout (UVLO) with Adjustable Hysteresis
● Current Mode Control
● Internal Error Amplifier with Reference
● Dual Mode Over-Current Protection
● Leading Edge Blanking
● Programmable Push-Pull Overlap or Dead Time
● Internal 1.5A Push-Pull Gate Drivers
● Programmable Soft-start
● Programmable Oscillator with Sync Capability
● Precision Reference
● Thermal Shutdown
●## Packages
● TSSOP-16
● WSON-16 (5x5 mm) Thermally Enhanced
●All trademarks are the property of their respective owners.
