LT1714IGN#PBF Datasheet PDF - Linear Technology

●The LT1714IGN#PBF is an UltraFast™ single/dual Comparator featuring rail-to-rail inputs, rail-to-rail complementary outputs and an output latch. Optimized for 3 and 5V power supplies, it operates over a single supply voltage range from 2.4 to 12V or from ±2.4 to ±6V dual supplies. It is designed for ease of use in a variety of systems. In addition to wide supply voltage flexibility, rail-to-rail input common mode range extends 100mV beyond both supply rails and the outputs are protected against phase reversal for inputs extending further beyond the rails. Also, the rail-to-rail inputs may be taken to opposite rails with no significant increase in input current. The rail-to-rail matched complementary outputs interface directly to TTL or CMOS logic and can sink 10mA to within 0.5V of GND or source 10mA to within 0.7V of V+. It has internal TTL/CMOS compatible latches for retaining data at the outputs. Each latch holds data as long as its latch pin is held high.

● Inputs can exceed supplies without phase reversal

● Rail-to-Rail complementary outputs (TTL/CMOS compatible)

● Ultrafast - 7ns at 20mV overdrive, 8.5ns at 5mV overdrive