LT3092IDD#PBF Datasheet PDF - Linear Technology

●The LT3092IDD#PBF is a programmable 2-terminal Current Source for use with In-line limiter. It requires only two resistors to set an output current between 0.5 and 200mA. A multitude of analog techniques lend themselves to actively programming the output current. The LT3092 is stable without input and output capacitors, offering high DC and AC impedance. This feature allows operation in intrinsically safe applications. The SET pin features 1% initial accuracy and low temperature coefficient. Current regulation is better than 10ppm/V from 1.5 to 40V. The LT3092 can operate in a 2-terminal current source configuration in series with signal lines.

● Input/output capacitors not required

● Resistor ratio sets output current

● 1% Initial set pin current accuracy

● Reverse-voltage protection

● Reverse-current protection

● <0.001%/V Line regulation typical

● Current limit and thermal shutdown protection