MAX5251BCAP+ Datasheet PDF - Maxim Integrated

●The MAX5251BCAP+ from Maxim Integrated Products is a +3V, quad, 10bit voltage-output DAC with serial interface in 20 pin SSOP package. It combines four low-power, voltage output, 10bit DAC and four precision output amplifiers. In addition to the four voltage outputs, each amplifier"s negative input is also available to the user. This facilitates specific gain configurations, remote sensing and high output drive capacity. Other features include software shutdown, hardware shutdown lockout, an active-low reset that clears all registers and DACs to zero, a user-programmable logic output and a serial-data output. Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16bit serial word loads data into each input/DAC register. The 3-wire serial interface is compatible with SPI™/QSPI™ and MICROWIRE™. It allows the input and DAC registers to be updated independently or simultaneously with a single software command.

● Single supply operation range from +3V to +3.6V

● INL is ±1LSB, DNL is ±1LSB

● Offset error is ±6mV, gain error is ±2.4LSB

● PSRR is 100µV/V, reference -3dB bandwidth is 650KHz, SINAD is 72dB

● Low supply current of 0.8mA (normal operation), 3µA (shutdown mode)

● Power-on reset clears all registers and DACs to zero

● User programmable digital output

● All logic inputs are TTL/CMOS logic compatible

● Operating temperature range from 0°C to 70°C