MAX6947ATE+ Datasheet PDF - Maxim Integrated

●The MAX6947ATE+ is a 10port, constant-current LED driver and I/O expander with PWM intensity control in 16 pin TQFN package. The I2C/SMBus compatible, serial interfaced peripherals provide microprocessors with 10 I/O ports rated to 7V. Each port can be configured as a 2.5mA to 20mA constant current LED driver (static or PWM), a 1.25mA to 10mA constant-current LED driver (static or PWM), an open-drain logic output or an overvoltage protected Schmitt logic input. Analogue and switching LED intensity control includes individual 8bit PWM control per output, individual 1bit analogue current control (half/full scale) per output and a global 3bit DAC current control that applies to all LED outputs. The MAX6947 can stagger the PWM timing of the 10port outputs in consecutively phased 45° increments. Staggering the outputs spreads the PWM load currents over time in eight steps, helping to even out the power-supply current and reduce the RMS current.

● Supply voltage range is 2.25V to 3.6V

● Operating temperature range from -40°C to 125°C

● I/O ports default to high impedance on power-up & I/O port inputs are overvoltage protected to 7V

● I/O port o/p are 7V rated open-drain, 10mA/20mA constant current or open-drain logic outputs

● I/O ports support hot insertion

● Individual 8bit PWM intensity control for each LED

● Active low reset input clears serial interface and can exit shutdown (Warm Start)

● AD0 input selects from two slave addresses

● Auto ramp-up out of shutdown and up to 4s hold off before ramp down into shutdown

● Shutdown current is 0.8µA (typ)