MB90F543GPF Datasheet PDF - Fujitsu

●■ DESCRIPTION

●The MB90540/545 series with FULL-CAN

●1 and FLASH ROM is specially designed for automotive and industrial applications. Its main features are two on board CAN Interfaces (one for MB90V545 series) , which conform to V2.0 Part A and Part B, supporting very flexible message buffer scheme and so offering more functions than a normal full CAN approach. The instruction set by F2MC-16LX CPU core inherits an AT architecture of the F2MC

●2 family with additional instruction sets for high-level languages, extended addressing mode, enhanced multiplication/division instructions, and enhanced bit manipulation instructions.The micro controller has a 32-bit accumulator for processing long word data.The MB90540/545 series has peripheral resources of 8/10-bit A/D converters, UART (SCI) , extended I/O serial interfaces, 8/16-bit timer, I/O timer (input capture (ICU) , output compare (OCU)).

●■ FEATURES

●• Clock

●   Embedded PLL clock multiplication circuit Operating clock (PLL clock) can be selected from : divided-by-2 of oscillation or one to four times the oscillation Minimum instruction execution time : 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock) Subsystem Clock : 32 kHz

●• Instruction set to optimize controller applications

●   Rich data types (bit, byte, word, long word)

●   Rich addressing mode (23 types)

●   Enhanced signed multiplication/division instruction and RETI instruction functions

●   Enhanced precision calculation realized by the 32-bit accumulator

●• Instruction set designed for high level language (C language) and multi-task operations

●   Adoption of system stack pointer

●   Enhanced pointer indirect instructions

●   Barrel shift instructions

●• Program patch function (for two address pointers)

●• Enhanced execution speed : 4-byte Instruction queue

●• Enhanced interrupt function : 8 levels, 34 factors

●• Automatic data transmission function independent of CPU operation

●   Extended intelligent I/O service function (EI2OS)

●• Embedded ROM size and types

●   Mask ROM : 256 Kbytes / 64 Kbytes / 128 Kbytes

●   Flash ROM : 128 Kbytes/256 Kbytes

●   Embedded RAM size : 2 Kbytes/4 Kbytes/6 Kbytes/8 Kbytes (evaluation chip)

●• Flash ROM

●   Supports automatic programming, Embedded Algorithm TM

●   Write/Erase/Erase-Suspend/Resume commands

●   A flag indicating completion of the algorithm

●   Hard-wired reset vector available in order to point to a fixed boot sector in Flash Memory

●   Erase can be performed on each block

●   Block protection with external programming voltage

●• Low-power consumption (stand-by) mode

●   Sleep mode (mode in which CPU operating clock is stopped)

●   Stop mode (mode in which oscillation is stopped)

●   CPU intermittent operation mode

●   Clock mode

●   Hardware stand-by mode

●• Process

●   0.5 µm CMOS technology

●• I/O port

●   General-purpose I/O ports : 81 ports

●• Timer

●   Watchdog timer : 1 channel

●   8/16-bit PPG timer : 8/16-bit × 4 channels

●   16-bit re-load timer : 2 channels

●• 16-bit I/O timer

●   16-bit free-run timer : 1 channel

●   Input capture : 8 channels

●   Output compare : 4 channels

●• Extended I/O serial interface : 1 channel

●• UART 0

●   With full-duplex double buffer (8-bit length)

●   Clock asynchronized or clock synchronized (with start/stop bit) transmission can be selectively used.

●• UART 1

●   With full-duplex double buffer (8-bit length)

●   Clock asynchronized or clock synchronized serial (extended I/O serial) can be used.

●• External interrupt circuit (8 channels)

●   A module for starting an extended intelligent I/O service (EI2OS) and generating an external interrupt which is triggered by an external input.

●• Delayed interrupt generation module

●   Generates an interrupt request for switching tasks.

●• 8/10-bit A/D converter (8 channels)

●   8/10-bit resolution can be selectively used.

●   Starting by an external trigger input.

●   Conversion time : 26.3 µs

●• FULL-CAN interfaces

●   MB90540 series : 2 channel

●   MB90545 series : 1 channel

●   Conforming to Version 2.0 Part A and Part B

●   Flexible message buffering (mailbox and FIFO buffering can be mixed)

●• External bus interface : Maximum address space 16 Mbytes

●• Package: QFP-100, LQFP-100