●The MC10E1651 comparator is functionally and pin-for-pin compatible with the MC1651 in the MECL III family, but is fabricated using the advanced MOSAIC III process. The MC10E1651 comparator incorporates a fixed level of input hysteresis as well as output compatibility with 10KH logic devices. In addition, a latch is available allowing a sample and hold function to be performed. The device is available in both a 16-pin DIP and a 20-pin surface mount package. The latch enable (LENabar and LENbbar) input pins operate from standard ECL 10KH logic levels. When the latch enable is at a logic high level the MC10E1651 acts as a comparator, hence Q will be at a logic high level if V1 > V2 (V1 is more positive than V2). Qbar is the complement of Q. When the latch enable input goes to a low logic level, the outputs are latched in their present state providing the latch enable setup and hold time constraints are met.The 100 series contains temperature compensation.
●Features
●---
● |
● Typical 3.0 dB Bandwidth > 1.0 GHz
● Typical V to Q Propagation Delay of 775 ps
● Typical Output Rise/Fall of 350 ps
● Common Mode Range -2.0 V to +3.0 V
● Individual Latch Enables
● Differential Outputs
● 28mV Input Hysteresis
● Operating Mode: VCC = 5.0 V, VEE = -5.2 V
● No Internal Input Pulldown Resistors
● ESD Protection: > 2 KV HBM, > 100 V MM
● Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
● Moisture Sensitivity Level 1
●For Additional Information, see Application Note AND8003/D
● Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
● Transistor Count = 85 devices
Part 3D Model
