MM74HC175MX Datasheet PDF - ON Semiconductor

●The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Information at the D inputs of the MM74HC175 is transferred to the Q and Q# outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse at the CLEAR input. All four Q outputs are cleared to a logical "0" and all four Q# outputs to a logical "1." The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to V

●Features

●---

● |

● Typical propagation delay: 15 ns

● Wide operating supply voltage range: 2-6V

● Low input current: 1 µA maximum

● Low quiescent supply current: 80 µA maximum (74HC)

● High output drive current: 4 mA minimum (74HC)