●The TI MSP430 family of low-power microcontrollers consists of several devices that feature different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in less than 10 µs.
● Embedded Microcontroller
● 16-Bit RISC Architecture up to 16 MHz
● Wide Supply Voltage Range From 1.8 V to 3.6 V
● Optimized Low-Power Modes (at 3 V)
● Active: 126 µA/MHz
● Standby
● LPM3.5 With VLO: 0.4 µA
● Real-Time Clock (RTC) Counter (LPM3.5 With 32768-Hz Crystal): 0.77 µA
● Shutdown (LPM4.5): 15 nA
● Low-Power Ferroelectric RAM (FRAM)
● Up to 15.5KB of Nonvolatile Memory
● Built-In Error Correction Code (ECC)
● Configurable Write Protection
● Unified Memory of Program, Constants, and Storage
● 1015 Write Cycle Endurance
● Radiation Resistant and Nonmagnetic
● Intelligent Digital Peripherals
● IR Modulation Logic
● Two 16-Bit Timers With Three Capture/Compare Registers Each (Timer_A3)
● One 16-Bit Counter-Only RTC Counter
● 16-Bit Cyclic Redundancy Check (CRC)
● Enhanced Serial Communications
● Enhanced USCI A (eUSCI_A) Supports UART, IrDA, and SPI
● Enhanced USCI B (eUSCI_B) Supports SPI and I2C
● High-Performance Analog
● 10-Channel 10-Bit Analog-to-Digital Converter (ADC)
● Internal 1.5-V Reference
● Sample-and-Hold 200 ksps
● Clock System (CS)
● On-Chip 32-kHz RC Oscillator (REFO)
● On-Chip 16-MHz Digitally Controlled Oscillator (DCO) With Frequency Locked Loop (FLL)
● ±1% Accuracy With On-Chip Reference at Room Temperature
● On-Chip Very Low-Frequency 10-kHz Oscillator (VLO)
● On-Chip High-Frequency Modulation Oscillator (MODOSC)
● External 32-kHz Crystal Oscillator (XT1)
● Programmable MCLK Prescalar of 1 to 128
● SMCLK Derived From MCLK With Programmable Prescalar of 1, 2, 4, or 8
● General Input/Output and Pin Functionality
● Total 60 I/Os on 64-Pin Package
● 16 Interrupt Pins (P1 and P2) Can Wake up MCU From LPMs
● All I/Os are Capacitive Touch I/Os
● Development Tools and Software
● Free Professional Development Environments
● Family Members
● MSP430FR2033: 15KB of Program FRAM + 512B of Information FRAM + 2KB of RAM
● MSP430FR2032: 8KB of Program FRAM + 512B of Information FRAM + 1KB of RAM
● Package Options
● 64 Pin: LQFP (PM)
● 56 Pin: TSSOP (G56)
● 48 Pin: TSSOP (G48)
