●The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B product family is not recommended for new designs. The MX29LV160D T/B family is the recommended replacement. Please refer to MX29LV160D T/B datasheet for full specifications and ordering information, or contact your local sales representative for additional support
●FEATURES
●GENERAL FEATURES
●• Byte/Word mode switchable:
● - 524,288 x8 / 262,144 x16 (MX29LV400C)
● - 1,048,576 x8 / 524,288 x16 (MX29LV800C)
● - 2,097,152 x8 / 1,048,576 x16 (MX29LV160C)
●• Sector Structure
● - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1 64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)
● - Provides sector protect function to prevent program or erase operation in the protected sector
● - Provides chip unprotect function to allow code changing
● - Provides temporary sector unprotect function for code changing in previously protected sector
●• Single Power Supply Operation
● - 2.7 to 3.6 volt for read, erase, and program operations
●• Latch-up protected to 250mA from -1V to Vcc + 1V
●• Low Vcc write inhibit : Vcc ≤ 1.4V
●• Compatible with JEDEC standard
● - Pinout and software compatible to single power supply Flash
●• Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device
●PERFORMANCE
●• High Performance
● - Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns
● - Fast program time: 7us/word typical utilizing accelerate function
● - Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C)
●• Low Power Consumption
● - Low active read current: 10mA (typical) at 5MHz
● - Low standby current: 200nA (typical)
●• Minimum 100,000 erase/program cycle
●• 20 years data retention
●SOFTWARE FEATURES
●• Erase Suspend/ Erase Resume
● - Suspends sector erase operation to read data from or program data to another sector which is not being erased
●• Status Reply
● - Data# Polling & Toggle bits provide detection of program and erase operation completion
●• Support Common Flash Interface (CFI)
●HARDWARE FEATURES
●• Ready/Busy# (RY/BY#) Output
● - Provides a hardware method of detecting program and erase operation completion
●• Hardware Reset (RESET#) Input
● - Provides a hardware method to reset the internal state machine to read mode
●PACKAGE
●• 44-Pin SOP
●• 48-Pin TSOP
●• 48-Ball TFBGA
●• 48-Ball LFBGA
●• 48-Ball WFBGA
●• 48-Ball XFLGA
●• All devices are RoHS Compliant
