NBA3N206S Datasheet PDF - ON Semiconductor

●The NBA3N206S is a 3.3 V supply differential Multipoint Low Voltage (M-LVDS) line Driver and Receiver for automotive applications. NBA3N206S offers the Type 2 receiver threshold at 0.1 V. The NBA3N206S has Type-2 receivers that detect the bus state with as little as 50 mV of differential input voltage over a common-mode voltage range of -1 V to 3.4 V. Type-2 receivers include an offset threshold to provide a detectable voltage under open-circuit, idle-bus, and other faults conditions. NBA3N206S supports Simplex or Half Duplex bus configurations.

●Features

●---

● |

● Low−Voltage Differential 30Ω to 55Ω Line Drivers and Receivers

●for Signaling Rates Up to 200 Mbps

● Type−2 Receivers Provide an Offset (100 mV) Threshold to Detect Open−Circuit and Idle−Bus Conditions

● Controlled Driver Output Voltage Transition Times for Improved Signal Quality

● −1 V to 3.4 V Common−Mode Voltage Range Allows Data Transfer With up to 2 V of Ground Noise

● Bus Pins High Impedance When Disabled or VCC ≤ 1.5 V

● M−LVDS Bus Power Up/Down Glitch Free

● Operating range: VCC = 3.3 ±10% V (3.0 to 3.6 V)

● Operation from –40°C to +125°C.

● AEC−Q100 Qualified and PPAP Capable

● These are Pb-Free Devices