NLSX4402FMUTAG Datasheet PDF - ON Semiconductor

●The NLSX4402 is a 2−bit configurable dual−supply bidirectional auto sensing translator that does not require a directional control pin. The VCC I/O and VL I/O ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and VL supply rails are configurable from 1.5 V to 5.5 V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage logic signals on the VCC side, and vice−versa. The NLSX4402 translator uses external pull−up resistors on the I/O lines. The external pull−up resistors are used to pull up the I/O lines to either VL or VCC. The NLSX4402 is an excellent match for open−drain applications such as the I2C communication bus.

●Features

●---

● |

● VL can be Less than, Greater than or Equal to VCC

● Wide VCC Operating Range: 1.5 V to 5.5 V

● Wide VL Operating Range: 1.5 V to 5.5 V

● High−Speed with 20 Mb/s Guaranteed Date Rate

● Low Bit−to−Bit Skew

● Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V

● Non−preferential Powerup Sequencing

● Power−Off Protection

● Small Space Saving Package: 1.4 mm x 1.0 mm UQFN8 Package

● These Devices are Pb−Free and are RoHS Compliant